What is Easyfind?

Easyfind is a technology that helps you to align your dish and get a lock on the satellite signal with minimum fuss.

It works by using the Easyfind Satellite Receiver and a matching Easyfind LNB (which is the gizmo on the end of the dish arm that collects the satellite signal and sends it to the receiver). The receiver sends the satellite information to the LNB, which then shows the status of the satellite signal using a three-colour LED light. When you’re properly aligned to the satellite, the light glows green and you’re all done! It can literally take seconds, or at the most, minutes.

This is how the setup process works:

1. You set the receiver to your chosen satellite (Astra 2 normally)
2. You set the elevation of the dish according to your location (usually the dish will be vertical to the ground) and point the dish roughly South.
3. The light on the LNB will glow red, so then rotate the dish towards the East (left) until the light glows yellow (meaning you’re close), then slowly continue until it it flashes green (meaning you are almost there) and then when it glows permanently green you’re locked onto the satellite with a nice strong signal.
4. Tighten the nuts on the satellite tripod/mount and you’re done! The whole process should take a couple of minutes at the most.
   

In summary, this is what Easyfind means to you:

• Quick, easy setup of your dish kit every time
• No technical understanding required
• No need for a Satfinder meter
• No compass bearings needed (just roughly where South is)
  
  
  
  We love it!