Please wait...

Continue shopping
View cart & checkout
Continue shopping
View cart & checkout

Skip to Content

£15.00

Vuesat Beam 2019 Modification Pack

Availability: In stock

Vuesat Beam 2019 Modification Pack
Vuesat Beam 2019 Modification Pack Vuesat Beam 2019 Modification Pack Vuesat Beam 2019 Modification Pack Vuesat Beam 2019 Modification Pack

Description

This mod pack creates easier usability when assembling and aligning the Easybeam Flatdish kit.

Included is:

  • Large smoothly designed wing nut which is used to replace the upper left 6mm nut on the alignment bracket. This is the only nut required to be locked off for setting the elevation so long as the other 3 nuts are fairly hand tight.
  • 10 mm spigot. This requires the user to drill out the base plate (which sits on the tripod) to a 10mm hole from the current 8mm diameter. There is a flat spot in the spigot which aligns with the side tripod knob.
  • 10 mm (17mm outer) nut and spanner used to tighten the dish to the tripod. The spanner also has velcro for siting on the side of the dish when not in use.
  • Yellow waterproof scale for sticking over the hard to see elevation markings.
  • Red cap for pushing over the nut when assembled for a tidy finish.

Facebook